Menu
et des offres
Des produits d'occasion

et des offres

Sales CLAYPAKY

C52324 Rotating Gobos

C52324 Rotating Gobos.

continuer à lire

C52323 Gobo wheel 5-position

C52323 Gobo wheel 5-position.

continuer à lire

C52322 Color Wheel

C52322 Color Wheel.

continuer à lire

C52306 Focal lens 250mm

C52306 Focal lens 250mm.

continuer à lire

C52305 Focal lens 190mm

C52305 Focal lens 190mm.

continuer à lire

C52174 Assembly plate

Assembly plate: a fixing plate that can be combined with the ceiling plate. It permits sandwich installation on any mounting that permits using at least 2 of the 4 holes available on the two plates.

continuer à lire

C52173 Telescopic ceiling mounting 70-105 cm

C52173 Telescopic ceiling mounting a telescopic mounting that can be combined with the 4-hole fixing plate. After fitting the fixed portion of the mounting inside the false ceiling, take out the extending portion and lock it in the required position. It is available in two versions: for false ceilings with a depth of 70 - 105 cm.

continuer à lire

C52172 Telescopic ceiling mounting 40-70 cm

C52172 Telescopic ceiling mounting a telescopic mounting that can be combined with the 4-hole fixing plate. After fitting the fixed portion of the mounting inside the false ceiling, take out the extending portion and lock it in the required position. It is available in two versions: for false ceilings with a depth of 40 - 70 cm and 70 - 105 cm.

continuer à lire

C52171 Plate for the ceiling or a horizontal top

C52171 Plate for the ceiling or a horizontal top: plate for fitting the projector on a horizontal surface. It can be fixed (either on the ceiling or a top) through the 4 holes already made in the plate. The bottom side is covered with non-slip rubber.

continuer à lire

C52170 Wall bracket

C52170 Wall bracket: bracket with 4 holes for fixing to the wall. Fitted in the two different positions, it permits mounting the shelf towards the top or bottom. The projector can be turned completely around its point of anchorage to obtain the best working position.

continuer à lire

C52164 Linear dimmer with continuos rotation (0-10V)

C52164 Linear dimmer with continuos rotation (0-10V).

continuer à lire

C52163 LCD digital clock

C52163 LCD digital clock: this accessory makes it possible to set the hours and minutes and choose from a 24-hour or a 12-hour (AM/PM) display. By turning the accessory over on the electrified rails it is possible to project the time in reverse on a screen or other walls that allow light to pass through them. In addition, turning it over while using a mirror accessory makes it possible to easily reach every corner of the room with both fixed and moving images.

continuer à lire

C52158 Manual or timed 3-position slide changer

C52158 Manual or timed 3-position slide changer, a wheel that can contain up to 3 slides size 24x36 mm, not supplied as standard; it is used to project photographs or slides created with a computer and then printed or drawn by a plotter; the images can be projected singly or at time intervals predefined by a timer, choosing from the three images that can be mounted on the wheel; timing from 1 sec. to 3 min. 0-10V 3-position slide changer: the same accessory is available with the possibility of control via a 0-10V analogue control unit.

continuer à lire

C52156 0-10V Colour changer

C52156 Colour changer: the same accessory is available with the possibility of control via a 0-10V analogue control unit.

continuer à lire

C52151 Manual or timed colour changer

C52151 Manual or timed colour changer: a wheel with 8 positions on which 7 dichroic colour filters are fitted as standard (ultra-pure, long-life and interchangeable with other colours available from the catalogue); it is used to colour the beam of light and projected image, choosing from eight colours, or to change colour continuously; passing from one colour to another takes place at pre-set time intervals defined by a timer; timing from 1 sec. to 3 min.

continuer à lire

C52150 Manual or timed stopper

C52150 Manual or timed stopper: instantaneously shuts off and makes the beam of light reappear at set time intervals, creating an effect that especially draws attention to an image that is continually appearing and disappearing; timing from 1 sec. to 3 min.

continuer à lire

C52146 Graphic film effect

C52146 Graphic film effect: wheel of diameter 130 mm composed of two discs enclosing a photographic film. The disc turns anticlockwise at 0.5 rpm to make it possible to see the pictures and read any messages scrolling from right to left on the projection wall.

continuer à lire

C52145 Strobe effect

C52145 Strobe effect: the disc is mounted on a motor that turns it continuously at a speed of 60 rpm (1 turn per second) with a resulting effect of 4 flashes a second.

continuer à lire

C52143 Rotating slide

C52143 Rotating slide: this accessory can contain a slide size 24x36 mm (not supplied as standard); it is used to project a photograph or a slide created with a computer and then printed or drawn by a plotter; the image turns around itself continuously; speed of rotation: 4 rpm. By using the specific adapter (C21035) it is also possible to mount gobos of diameter 31.5mm.

continuer à lire

C52142 Continuously rotating fluid effect

C52142 Continuously rotating fluid effect: a wheel divided into watertight compartments of different geometrical shapes containing a water and oil based fluid, of 4 different colours; ever different colour effects created by the random motion of each fluid are projected; speed of rotation: 2 rpm.

continuer à lire

C52141 Continuously rotating graphic effect

C52141 Continuously rotating graphic effect: special metal disc, diameter 130 mm, of which, during rotation, only the portion illuminated by the optical unit gets projected; the beam of light is continuously modelled with the graphic shapes obtained in the disc, which turns smoothly; various discs are available with different graphics; speed of rotation: 2 rpm.

continuer à lire

C52139 Wind-water-fire effect

C52139 Wind-water-fire effect: treated glass disc of diameter 130 mm that, by modelling the projected image, gives it an undulatory motion typical of the effects of flags waving in the wind, rolling waves or fire and heat; the projected image stays readable; speed of rotation: 15 rpm.

continuer à lire

C52137 Continuous colour changer

C52137 Continuous colour changer: a wheel with 8 positions on which 7 dichroic filters are fitted as standard (ultra-pure, long-life and interchangeable with other colours available from the catalogue); passing from one colour to another is continuous; the effect is that the beam of light or projected image are coloured, changing colour continuously, and, during rotation, obtaining two-tone beams; speed of rotation: 2 rpm.

continuer à lire

C52136 Continuous gradual shutter

C52136 Continuous gradual shutter gradually cuts off and equally gradually makes the beam of light reappear in a continuous cycle, creating a fading effect that progressively darkens the projected image that, again progressively, then reappears; speed of rotation: 15 rpm.

continuer à lire

C52134 Rotating 4-way prism

C52134 Rotating 4-way prism: multiplies the projected image by 4 and turns it on its axis continuously, making a full, continuously moving image; speed of rotation: 4 rpm.

continuer à lire

C52131 Adjustable rotating mirror

C52131 Adjustable rotating mirror: to project a moving image on an elliptic or circular path by means of a circular mirror continuously turning on its axis, which may also be angled to increase the diameter of the path travelled; speed of rotation: 2 rpm.

continuer à lire

C52130 Adjustable oscillating mirror

C52130 Adjustable oscillating mirror: rectangular mirror oscillating on its own axis with an adjustable travel for projecting an image onto a wall, column or floor with the effect of it moving from left to right or from top to bottom and vice versa; speed of travel: 2 rpm.

continuer à lire

C52109 Single element lens 1:4,4/200mm

C52109 Single element lens 1:4,4/200mm.

continuer à lire

C52108 Multi element lens 1:3,5/150mm

C52108 Multi element lens 1:3.5/150mm.

continuer à lire

C52107 Multi element lens 1:2,8/120mm

C52107 Multi element lens 1:2,8/165mm.

continuer à lire

C52102 Single element lens 1:4/165mm

C52102 Single element lens 1:4/165mm.

continuer à lire

C52003 V.I.P. 300 DIA

C52003 V.I.P. 300 DIA is a modular system specially designed to project slides, with a discharge lamp of 300 Watts - HTI 300 or longlife HMD 300.

continuer à lire

C71020 Point MH Moving Head with lamp

C71020 Point MH Moving Head with lamp.

continuer à lire

C71010 Point In with lamp

C71010 Flush-mounting, with adjustable angle and rotation.

continuer à lire

C71001 Point with lamp

C71001 Point Projector with bracket for mounting on any surface.

continuer à lire

CP COLOR 150E with lamp

The CP Color 150-E is a 150 W outdoor colour changer, particularly useful for illuminating the architectural, historical and artistic details of buildings, monuments, colonnades, fountains and all kinds of urban enhancements.

continuer à lire

Colorwave 300

Colorwave 300 is designed to enhance commercial environments, as well as entertainment and leisure settings, with its uniform color wash displays.

continuer à lire Information au format PDF

SHARPY PLUS with 330W lamp

The SHARPY PLUS is a 100 % HYBRID unit which is able to be a perfect spotlight and a perfect beam light. It has an extraordinary efficiency which garanties substantial savings through lower power consumption.

continuer à lire Information au format PDF

Copyright : publication des photos avec l’aimable autorisation de nos clients.